Estimate Concrete for a Continuous Footing
Multiply footing length, width, and depth — and, if needed, a count of identical pieces — to get a planning volume in cubic yards and cubic meters.
Footing volume
For a rectangular footing, volume is length × width × depth. A continuous wall footing is usually entered as the total length of the footing, times its width and depth. If you have several identical piers or pad footings, enter one footing’s dimensions and set the number of identical pieces. Depth may be entered in inches (divide by 12 to get feet) or in metric units.
This is only a volume estimate. Footing width, depth, reinforcement, and frost depth are structural and code questions. Do not use a default depth in this form as a design value — replace it with the depth from the drawings or from a qualified professional.
Assumptions used on this site (typical planning figures; always confirm the product you buy): 1 cubic yard = 27 cubic feet. Thickness in inches is converted to feet (divide by 12) before multiplying. Typical premix bag yields: 80 lb ≈ 0.60 cu ft (~45 bags/yd³), 60 lb ≈ 0.45 cu ft (~60 bags/yd³), 40 lb ≈ 0.30 cu ft (~90 bags/yd³). A 5–10% waste allowance is common. Ready-mix is often ordered in 0.25 yard increments. Metric bag yields, when used: 25 kg ≈ 0.0125 m³ and 20 kg ≈ 0.010 m³, unless you enter the yield from the bag.
Disclaimer: These tools give planning estimates only. Bag yields vary by brand and mix, so check the coverage printed on the bag you buy. Ready-mix quantities, slump, reinforcement, and thickness for any structural, load-bearing, frost-protected, or code-regulated work must follow the project specification, the adopted local building code, and the judgment of a qualified professional. This site is not a structural design service and does not replace a licensed engineer or contractor.