Convert Dimensions to Concrete Volume

A general rectangular volume calculator for concrete planning — enter dimensions in feet, inches, yards, meters, or centimeters and read the result in cubic yards and cubic meters.

Calculator

A general rectangular volume

This page is the unit-flexible volume tool: it multiplies length × width × thickness (or depth) in mixed US customary or metric units and reports cubic feet, cubic yards, and cubic meters. Use it when you already know the three sides of a rectangle and want the volume without a slab- or footing-specific write-up. Specialized pages are also available for a slab, a pad, and a footing.

Conversion constants used here: 1 cubic yard = 27 cubic feet, and 1 cubic meter = 35.3147 cubic feet (the international foot). Inches are converted to feet by dividing by 12 before multiplying.

Assumptions used on this site (typical planning figures; always confirm the product you buy): 1 cubic yard = 27 cubic feet. Thickness in inches is converted to feet (divide by 12) before multiplying. Typical premix bag yields: 80 lb ≈ 0.60 cu ft (~45 bags/yd³), 60 lb ≈ 0.45 cu ft (~60 bags/yd³), 40 lb ≈ 0.30 cu ft (~90 bags/yd³). A 5–10% waste allowance is common. Ready-mix is often ordered in 0.25 yard increments. Metric bag yields, when used: 25 kg ≈ 0.0125 m³ and 20 kg ≈ 0.010 m³, unless you enter the yield from the bag.

Disclaimer: These tools give planning estimates only. Bag yields vary by brand and mix, so check the coverage printed on the bag you buy. Ready-mix quantities, slump, reinforcement, and thickness for any structural, load-bearing, frost-protected, or code-regulated work must follow the project specification, the adopted local building code, and the judgment of a qualified professional. This site is not a structural design service and does not replace a licensed engineer or contractor.